Search results for "modified bitumen"
showing 10 items of 15 documents
Are we correctly measuring the rotational viscosity of heterogeneous bituminous binders?
2020
Modified bituminous binders allow asphalt technologists to design asphalt mixtures with superior performance. However, several recent studies highlighted that due to the complexity of these material, their characterisation can be challenging since common procedures used to characterise neat bitumen might not be adequate. For instance, during high temperature rotational viscosity testing of recycled tyre rubber modified binders (RTR-MB), a number of changes may occur to the sample leading to the here-defined sample stability which in turn provides misleading results. In this study the authors want to first provide a deeper understanding of this phenomenon by a numerical analysis using a besp…
Comparison between bitumen modified with crumb tyre rubber and styrene butadiene styrene
2009
The improvements in terms of mechanical properties due to the use of polymers to modify bitumens in road paving applications have already been widely demonstrated. The aim of this paper is to show how the rheology and the performance of a bituminous binder mixed with crumb rubber recycled from used tyres (CR-MB), could be comparable with a styrene butadiene styrene (SBS-MB) created with the same base binder and currently used for road applications. Physical, chemical and performance characterization followed by rheological and storage stability analyses have been undertaken as the basis for the comparison. The results of the investigation indicate that the blended CR-MB shows large improvem…
Effect of Short-Term and UV Irradiation Aging on the Behaviour of SBS-Modified Bitumen
2022
To obtain road bitumen with improved temperature and fatigue resistance, polymers and/or rubbers could be added to it. A particularly suitable polymer for bitumen modification is styrene-butadiene-styrene (SBS) copolymer but limited information is available about the ageing behaviour of modified binders. In this work, two neat bitumens, with different penetration grades, and two SBS-modified bitumens, containing different SBS amounts, were selected, and their short-term and UVB ageing behaviour were investigated considering dynamic shear rheometry and Attenuated Total Reflectance-Fourier Transformation InfraRed spectroscopy (ATR-FTIR). Short-time ageing behaviour was investigated performing…
Influence of short-term aging on mechanical properties and morphology of polymer-modified bitumen with recycled plastics from waste materials
2020
Polymer-modified bitumen (PMB) is bitumen that has been specifically engineered with polymer for providing enhanced performance in service. The aging of bitumen is a main aspect that is able to affect its final performance: during the production phase in a hot mix plant, all the binders experience short-term aging due to the high processing temperature. The same is true during the production of the modified binder, when the polymer is dispersed at high temperature in the bitumen mass. This paper aims at studying the effect of short-term aging when using different types of modifiers such as recycled polymers obtained from waste materials. A 50/70 penetration-grade bitumen has been modified, …
A simple interpretation of the effect of the polymer type on the properties of PMBs for road paving applications
2018
Abstract The paper presents the results of the rheological characterisation of polymer-modified bitumen for paving applications. In order to find a simple interpretation of the influence of polymer type on the blends produced, in this study high density and low density polyethylene (PE) with different chemical properties were used, as well as ethylene-vinyl acetate. The chemical characteristics of the base bitumen and the polymers used were determined by means of SARA analysis and Fourier Transform Infrared Spectroscopy, FTIR, respectively. The morphology of the produced blends was investigated by means of fluorescent light optic microscopy, while the mechanical properties were investigated…
Improved Testing Setup for Real-Time Monitoring of PMBs During Manufacturing and Rotational Viscosity Measurements
2021
Polymer modified binders (PMBs) are a practical solution to design asphaltmixtures with superior performance. Although these polymers often improve bitumen properties to some extent, their final performance are linked to the accurate control of the properties during manufacturing and storage. However, some of the common procedures used to characterise neat bitumen are not suitable with these binders making their characterisation challenging. This study presents a novel laboratory procedure to produce SBS-MB through a real-time monitoring of the rotational viscosity, as well as an attempt to understand the suitability of current testing geometries to measure viscosity of such a complex bitum…
Effect of ageing on the morphology and creep and recovery of polymer-modified bitumens
2018
Polymer additives are used to improve the properties of road bitumens including their oxidative resistance. However, their usage as anti-oxidative materials remains relatively unclear. This study aims to investigate the changes in the morphology and the rheological response of polymer modified bitumens used in road pavement construction caused by ageing. An elastomer (radial styrene butadiene styrene, SBS) and a plastomer (ethyl vinyl acetate, EVA) polymer were mixed with one base bitumen at three polymer concentrations. The bitumens were RTFO and PAV aged. The morphology of the bitumens was captured by fluorescence microscopy while the rheological properties were measured by means of the m…
Optimisation of liquid rubber modified bitumen for road pavements and roofing applications
2020
Abstract Polymer Modified Bitumens (PMBs) are largely used for pavement and roofing membranes applications with Styrene-Butadiene-Styrene Block copolymer (SBS) playing a major role in both markets despite its constantly increasing price due to the rising demand for quality bitumen modifiers. On the other hand, there is an increasing trend of recycling end of life tyres generating Recycled Tyre Rubber (RTR) at affordable price. This investigation aims at engineering a modified bitumen with a combination of Liquid Rubber (LR), a homogeneous blend of 50–70% RTR pre-processed in combination with heavy oils, and a wax denominated Ethylene Bis Stearamide (EBS). In the first phase, the effect of L…
Laboratory investigation into the modification effect of paving bitumen with different plastomeric polymers
2017
The use of polymer/bitumen modified blends in road paving applications has been increasingly advancing from the technological point of view. Plastomeric polymers are known to be amongst the most used in bitumen modification. Therefore, this paper presents the influence and degree of modification of several plastomeric modified bitumen in terms of rheological properties and morphology. Conventional tests such as penetration grade, Ring-and-Ball softening point and storage stability were performed. Rheological properties of the modified blends were characterized in terms of dynamic mechanical analysis via frequency sweep tests using the dynamic shear rheometer (DSR). The morphology of the sam…
EFFECT OF PROCESSING TEMPERATURE VARIATION ON STORAGE STABILITY OF TIRE RUBBER MODIFIED BINDERS
2012
Tire Rubber Modified Binders (TR-MBs), produced through wet process and used worldwide (e.g. asphalt rubber), have been demonstrated to provide various benefits to pavements and, moreover, represent a good opportunity for recycling tire rubber. However, this technology is still struggling to be fully adopted in Europe, mainly because of the poor stability of TR-MBs during high temperature storage, which leads to high initial costs in modifying existing asphalt plants. No-agitation TR-MBs (also known as terminal blends) are proving to be a great option and their development could also be the key to spreading the use of tire rubber in paving applications in Europe. This paper aims to enrich t…